關風機入口/出口：入口為圓口并配有透明視窗，以便觀察物料的流動狀況;出口為方形增大了出口面積使物料順利排出。

　　普通型：結構緊湊，占用空間小。

　　軸承外置式：防止粉塵侵入軸承、增大適應溫度的范圍。

　　軸承外置式安裝、性能優異。

　　驅動方式：馬達直聯驅動為主、鏈驅動。

　　關風機材質：碳鋼、鑄鐵、不銹鋼、陶瓷、尼龍、四氟、特氟龍、鈦合金、鋁合金、各種合金系列等。【電話/微信咨詢：陳經理18068546632】

　　關風機的安裝：

　　1、檢查產品經過運輸或貯藏后是否損壞銹蝕;葉輪應能靈活轉動。

　　2、與關風器的結合平面應平整，平面度不大于0.5mm，以免機殼變形引起故障。

　　3、關風器安裝后要校正水平，緊固固定螺栓，葉輪能靈活轉動無障礙。【電話/微信咨詢：陳經理18068546632】

　　我公司專 業生產(B)GFY、YJD系列關風機(關風器)、星型卸料器、DS系列電動鎖氣器、DN型旋轉閥，快開閥、清潔閥、風送式旋轉閥等產品。廣泛應用于鋰電池、糧食、飼料、石油化工、制藥、淀粉、油脂、化工干燥、塑料、除塵、冶金、環保、電子、煤炭、建筑、電力機械等行業設備上。用于固體粒料、粉料、超微粉體在氣力輸送及管網正負壓狀態下的卸料。

           《掃二維碼-添加 陳經理 微信-咨詢風送式關風機》

　　Shut down the inlet/outlet of the fan: The inlet is circular and equipped with a transparent window for observing the flow of materials; The square shape of the outlet increases the outlet area and facilitates the smooth discharge of materials.

　　Ordinary type: compact structure and small space occupation.

　　External bearing: prevents dust from entering the bearing and increases the temperature adaptability range.

　　External installation of bearings, excellent performance.

　　Drive mode: mainly direct motor drive, chain drive.

　　Material of the fan: carbon steel, cast iron, stainless steel, ceramic, nylon, PTFE, PTFE, titanium alloy, aluminum alloy, various alloy series, etc.

　　Installation of shutdown fan:

　　1. Check whether the product is damaged or corroded after transportation or storage; The impeller should be able to rotate flexibly.

　　2. The joint plane with the air conditioner should be flat, with a flatness of no more than 0.5mm, to prevent deformation of the casing and potential malfunctions.

　　3. After the installation of the air conditioner, it is necessary to calibrate the level, tighten the fixing bolts, and ensure that the impeller can rotate flexibly without obstacles.